Turnigy AquaStar 2842-2800KV Water Cooled Brushless Outrunner Motor SKU: 9357000002-0

Don RecardoDon Recardo Club Members Posts: 12

Hi Gary , Can you tell me the spacing of the mounting holes
for this motor and are they threaded M3 ?

Cheers
Don

Comments

  • Don RecardoDon Recardo Club Members Posts: 12

    does no one no the answer ?

  • Don RecardoDon Recardo Club Members Posts: 12

    As I got no answer all I could do was measure them up for myself.
    I measured a hole and it was 1/2" from the center of the hole to the center of the motor spindle
    then using a CAD package I created at bolt hole circle and cut it out using my laser , I knoiw that will be correct within .001 of a mm.
    Guess what, only the hole I measured lines up , the holes drilled in the motor all vary in distance from the center of the motor from between 11.5mm to 13mm. I think Stevie Wonder could have made a better job of it .
    I had assumed the motors were all made by CNC so either this one wasnt or all the motors are just as inaccurate

  • WTWUKWTWUK CornwallClub Members Posts: 13,618 ✭✭✭
    edited August 7

    That is as it is - two diagonal pairs of different centres.

    And your measurement of 1/2".... accurate to 1 thousandth of a... millimetre. 🙄

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file