Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

9X Flaps mixed with elevator

ottoop51ottoop51 Club Members Posts: 4
Hi.



Turnigy Stock firmware.

Aileron + Flap used to aileron control.

Have maked flaps on an Multiplex Mentor, using bouth Aux cannel controled by Hov Pit on cannel 7 and 8.

Want elevator mix with flaps to make trim of model.

Have put in MIX 1:

STATE = ACT

MASTER = AUX

SLAVE = ELE

DNRATE = 10

SWITCH = ID1

It does not work.

Anybodey out there to help/tell me the right way to do it?



Thanks

Comments

  • SootySooty Christchurch NZClub Members Posts: 6,110 ✭✭✭
    Setup is a right bastard with original firmware. I can't understand how anyone could deliberately set out to develop and market such a crock of s**t.



    Is MASTER = AUX set to either Channel 7 or 8?

    Does the Hov pot operate flaps OK without any mix?

    If no - then that has to be fixed first - it will most likely be a channel assignment problem.



    If answer is YES then the setup for SLAVE + ELE is wrong

    SWITCH = ID1 does not sound right - shouldn't it be Hov pot which should be either P1/P2/P3?



Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file