Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

TX6i Elevon Trouble

Steve StephensonSteve Stephenson Club Members Posts: 3
edited June 14 in Talk to Gary

Hello, I have a new Orange TX6i and am needing help on elevon control. It is simple enough to turn them on and do get a mixing function.
My problem is the ailerons actuate from elevator input and my elevators actuate from aileron input.
Can this be fixed?

Thanks,
Steve

Comments

  • Steve StephensonSteve Stephenson Club Members Posts: 3

    Hello, I have a new Orange TX6i and am needing help getting flaperons mixed. I downloaded the manual for the radio, but the manual has no instructions on mixing.

    Thanks,
    Steve

  • WTWUKWTWUK CornwallClub Members Posts: 13,356 ✭✭✭

    Yes. Change to servo wires to the correct rx channels.

  • Steve StephensonSteve Stephenson Club Members Posts: 3

    Thanks for your input, I have changed servo wires several times and still get the same results.

  • Steve StephensonSteve Stephenson Club Members Posts: 3
    edited June 15

    I just tried elevon function with a different receiver and have the same results.
    I've interchanged the elevator and aileron servo inputs several times and get the same results. It almost seems like a software or programming fault.
    I sure wish I could get this to work. I have a scratch built flying wing glider I'd like to fly.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file