I've already ordered (and received) from Aus Warehouse:
1x #9310000060/32084 Hobbyking Bixler 2 EPO 1500mm
w/ Brushless Motor, Servos and Optional Flaps (ARF) = $80.31
1x #T2200.3S.25/14668 Turnigy 2200mAh 3S 25C Lipo Pack = $14.41
1x #TR_P25A/32064 TURNIGY Plush 25amp Speed Controller = $12.06
2x #HK15178/32071 HK15178 Analog Servo 10g / 1.4kg / 0.09s = $4.06
I now have on order (but held up) from International warehouse:
1x #HKB610A/12105 HobbyKing ECO6-10 200W 10A
6S Bal/Dis/Cyc Charger w/ acc. = $39.99
1x #9171000184/31544 Turnigy 9XR Transmitter Mode 2 (No Module) = $50.22
1x #T-Twins/10993 Twin pack charge lead (2 x 3S)6S w/ XT60 = $1.99
1x #DJT/14355 FrSky DF 2.4Ghz Combo Pack for JR w/ Module & RX = $49.29
1x #9171000183/31315 Turnigy 9XR Safety Protected
11.1v (3s) 2200mAh 1.5C Transmitter Pack = $12.99
1x #T2200.3S.25/8934 Turnigy 2200mAh 3S 25C Lipo Pack = $10.57
1x #BOX-379g/9087 Extra Length Cardboard Box and Packing 379g = $0.00
Three simple questions:
1) Anything obvious I'm missing? Any suggestions in general?
The second order is being held up by the ECO6-10 charger. I went to the Intnl warehouse for the transmitter (ERX) and the charger. Once there, I padded out the order to make use of the shipping charges - i.e. other than the tx, module, receiver and charger the other stuff does not have to come from Intnl warehouse.
2) Is there a better way to do it?
Can I / Should I delete the charger and order a different one to get stuff moving?
3) If I'm going to delete the charger, should I delete other stuff from the order and get them locally?
Any help would be greatly appreciated.