Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Turnigy prop adapters ( NTM 28-ACC) UPC # 16719{K.01.1.5.1}

Robert PeanRobert Pean Club Members Posts: 3

The 3 screws that come with the kit to mount the adapter to the motor are larger than the threaded holes in the motor it self. The blind hole of the adapter is not deep enough to seat to the front of the motor and is .5mm smaller than the hub it is to fit over. The motor is a Turnigy D2836/8 1100kv. Any thoughts. You can email me at [email protected]

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file