Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

radio turnigy 9x

alain TISSERANTalain TISSERANT Club Members Posts: 6

bonjour
je viens d'acheter une radio turnigy 9x il et impossible de sauvegarde plusieur model 8 emplacement , mais les recepteur ne fonctionne plus en passant de l'un a l'autre
si je mets FrSky DJT 2.4Ghz et il compatible?
avec lui serra t il possible de passe d'un a l'autre ?
merci

Comments

  • alain TISSERANTalain TISSERANT Club Members Posts: 6

    voici une vidéo explicative
    www.youtube.com/watch?v=Qh4byn2pDZs

  • WTWUKWTWUK CornwallClub Members Posts: 12,851 ✭✭✭
    edited November 5

    Remove bind plug BEFORE powering down receivers.
    Then turn off transmitter.

    BEFORE changing model, turn on transmitter, power up receiver and turn off receiver then transmitter to complete. You can then change model and bind to new receiver.

    DJT is compatible, but some plastic needs to be removed from 9X module bay pins.

  • alain TISSERANTalain TISSERANT Club Members Posts: 6

    merci a vous
    thank you

  • alain TISSERANTalain TISSERANT Club Members Posts: 6

    Hello
    I followed the procedure, nothing works impossible to pass from one to the other
    as the video shows
    see the video

    bonjour
    j'ai suivi la procédure ,rien ne marche impossible de passer de l'un a l'autre
    comme la vidéo le montre
    voir le vidéo

  • WTWUKWTWUK CornwallClub Members Posts: 12,851 ✭✭✭
    edited November 7

    Turn transmitter OFF before changing model to bind another receiver... you are not following the process correctly.

    1. Bind plug into RX.
    2. Power ON RX.
    3. Power ON TX in BIND mode.
    4. Pull out bind plug from RX.
    5. Power RX OFF
    6. Power TX OFF
    7. Power TX ON
    8. Power RX ON and check servo moves.
    9. Power RX OFF
    10. Power TX OFF
    11. Power TX ON and change MODEL.
    12. Power TX OFF
    13. Repeat steps 1 thru 10 for new model and RX
  • alain TISSERANTalain TISSERANT Club Members Posts: 6

    Hello
    all steps taken
    rx1 ok
    rx2 ok
    when i want to go back to rx 1, it blinks more connection
    like the video, it has no grade in memory, it no longer works and needs the blind a new
    Bonjour
    toutes les etapes effectuées
    rx1 ok
    rx2 ok
    quand je veux revenir au rx 1 ,il cligniote plus de connection
    comme la video,il a pas grade en memoire,il ne fonctionne plus et faut le blind a nouveaux

  • alain TISSERANTalain TISSERANT Club Members Posts: 6

    Je pense que le problème vient de la radio (la meme que la vidéo)
    Pas de menu aveugle comme autre radio de la marque (Radio Turnigy Evolution)?
    I think the problem comes from the radio (the same as the video)
    No blind menu like other radio of the brand (Radio Turnigy Evolution)?

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file