Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

How can I charge the turnigy round cell batteries?

chavalotchavalot Club Members Posts: 53
I've never used this type of batteries:

http://www.hobbyking.com/hobbyking/store/__23320__Turnigy_nano_tech_1200mah_1S_15C_Round_Cell.html



I would like to use 1 to 3.7 V and two in series to 7.4V.

How to be connected?



Thank's.

Comments

  • Paul80Paul80 Club Members Posts: 161
    As it says in the specs that they have solder tabs then you would assume that is how you connect them together to make packs and where you connect your charger for charging.Paul802016-06-27 17:06:17
  • chavalotchavalot Club Members Posts: 53
    these batteries do not need to have balance plug and discharge plug, right?

    just one is enough?

    I've never solder batteries and I'm a little lost, thank you very much for your help.
  • __Evan__Evan Club Members Posts: 1,122
    You don't need a balance plug for a 1S battery.



    For a 2S pack, you'll create a 3-pin balance plug with the black lead connected to the negative terminal of the pack, the red lead connected to the positive terminal of the pack, and the yellow/white centre lead connected to the link between the two batteries.
  • chavalotchavalot Club Members Posts: 53
    When the batteries arrive, I'll try.

    thank you very much.
  • chavalotchavalot Club Members Posts: 53
    Hello.

    I have here the batteries. The welding area is very small!;

    Or you can remove the clear plastic carrying in that area?

    What type of cable do you use? (size in AWG or mm2)



    Thank you.chavalot2016-07-03 18:41:53
  • chavalotchavalot Club Members Posts: 53
    image



    welding balanced wires to charged wires, would it work?

  • __Evan__Evan Club Members Posts: 1,122
    Yes, that'll be fine.

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file